There are several mounting options for the Motion Sensor 2 Pet (see detailed instructions for each option below):

It is important that pet immune motion sensors are placed at 2.1 m / 6ft 10 inches height (+/- 5 cm / 2 inches). Furthermore, it is recommended to install pet immune motion sensors in the corner of the room.

Alternatively, you can use the large, round piece of double adhesive tape to mount the sensor. Make sure to press firmly on the sensor with the tape to make it stick, since it is pressure-activated tape.

If your sensor includes a corner bracket, you can mount the sensor flat on the wall or ceiling, using the magnet from the bracket.

Corner or ceiling mounting with corner bracket

If you have a sensor with a corner bracket included, you can mount the sensor with this bracket in a corner or on the ceiling.

Alternatively, you can use the two small, round pieces of double adhesive tape to mount the bracket in the corner (do not mount it on the ceiling with tape). Make sure to press firmly on the bracket with the tape to make it stick, and then attach the sensor to the bracket.

When mounting with a corner bracket, you have two options for mounting the sensor on the bracket: either with the magnet or screws.

Mounting the sensor on the corner bracket with the magnet

Mounting the sensor on the corner bracket with the screws

If you are using the sensor for security purposes, we recommend using screws to mount the sensor on the bracket for a more secure fastening.

Mounting and connecting

Mounting and connecting

How to get your Motion Sensor 2 Pet set up.